Description:
- The headlight lens restoration kit improves the performance of the headlights, to restore clear and bright lights.
|- Designed to restore clarity to the lens of the headlights that are yellowing, oxidation, aging, scratching, etc.
|- 3 simple steps: sand, polish and protect. Easier than replacing an old lighthouse.
|- Comes with an adapter for the power drill, quickly repairing with less time and effort.
|- Suitable for car headlights, taillights, fog lamps or directional lights.
|- A complete car headlight restoration kit. Designed for repairing the car headlamps yellow, oxidation, aging, scratches and other issues in few steps. Get great results on most plastic lenses, such as tail lights, trailers, boat windows, helmet visors, motorcycle windscreens, snowmobiles and more.
Specifications:
Type: Headlight Restoration Kit
Color: As Shown
Functions: Repair yellowing, oxidation, aging, scratching
Package Include：
1 X Backer Pad M10 Thread
1 X Adapter
1 X White Flat Sponge
1 X Orange Flat Sponge
1 X Mask Tape
2 X 3ml Protective Fluid
2 X 40ml Polidh Paste
2 X P800 Sanding Discs
2 X P1200 Sanding Discs
2 X P2000 Sanding Discs
1 X Manual
How to Use：
Step 1: Prepare the Headlight Lens by Cleaning It with Water. Cover the Area Around the Lens to Avoid Scratching the Nearby Painted Surface. Attach a Disc to the Sanding Tool and Use a Sanding Machine If You Have One, or Sand Manually If You Don t.Use Sandpaper from Coarse to Fine P800-P1200-P2000. (Note: the Sanding Effect Is Known to Completely Polish the Lamp Surface Yellowing Oxide, some Headlamps Have Internal Yellowing and This Cannot Be Operated).
Step 2: Replace the Yellow Sponge and Apply the Blue Bagged Repair Scratch Bright Polishing Solution for Operation, Sanding Time About 5 Minutes. (Note That This Operation Can Be Carried out Until There Are No Visible Polishing Marks on the Lamp Surface.)
Step 3: Clean the Headlamp and Ensure the Lens Is Dry Before Proceeding to the Next Step. Ensure That You Are Not in the Sun When Carrying out This Step (Very Important). Using a White Sponge Disc Kit, Apply an Even Layer of Protective Fluid to the Surface. Allow the Protective Liquid to Sit and Dry for 15 Minutes. Then, Allow the Protective Liquid to Cure in Direct Sunlight for 1 to 2 Hours. (Caution: Keep the Lens Dry and Do Not Wash the Car for 24 Hours.)
Package Include：
1 X Backer Pad M10 Thread
1 X Adapter
1 X White Flat Sponge
1 X Orange Flat Sponge
1 X Mask Tape
2 X 3ml Protective Fluid
2 X 40ml Polidh Paste
2 X P800 Sanding Discs
2 X P1200 Sanding Discs
2 X P2000 Sanding Discs
1 X Manual
