Ip5328P Dual Usb 18650 Treasure Tpye-C 3.7V To 5V 9V 12V Step Up Circuit Board

Feature 1.100 brand new and high quality 2.Suitable for Circuit Board Battery type: 3.7V battery (aggregate or 18650 lithium battery) connected in parallel, the capacity is not limited, the larger the capacity, the longer the charging and discharging time, please add a protection board for the battery, the main board has positive and negative poles, the battery cannot If you connect it reversely, you will be responsible for the consequences of reversely burning the motherboard. Fast charge indication: input and output high voltage fast charge indicator. Conversion efficiency: 95 efficiency (power efficiency varies with different voltages) For details, please refer to the specification for introduction. Press the button: If the button lasts longer than 60ms but less than 2s, it is a short press action. A short press will turn on the battery indicator light and boost output, and a super long press for 10s can reset the entire system. There will be no response to the button action of less than 30ms.

Mobile phone insertion automatic detection function:

IP5328P automatically detects the insertion of a mobile phone, wakes up from the standby state immediately, turns on the boost 5V to charge the mobile phone, saves button operation, and supports no-button solution Low power lock and activation. When the IP5328P is connected to the battery for the first time, no matter what the battery voltage is, the chip is in a locked state, and the lowest bit of the power indicator will flash 4 times to prompt; in the non-charging state, if the battery voltage is too low, it will trigger a low-power shutdown , IP5328P will also enter the locked state. In the locked state, in order to reduce the static power consumption, the IP5328P does not have a mobile phone insertion detection function, nor can it be activated by pressing a button. At this time, the button action cannot activate the boost output, but the lowest position of the battery light will flash 4 times as a reminder. In the locked state, you must enter the charging state to activate the chip function. The IP5328P has a constant-current, constant-voltage Li-ion battery charge management system that supports synchronous switching architecture. It can automatically match different charging voltage specifications. When the battery voltage is less than 3V, use 250mA trickle charging; when the battery voltage is greater than 3V, enter the input constant current charging, the maximum charging current of the battery terminal is 5.0A; when the battery voltage is close to the set battery voltage, enter the constant voltage charging; When the charging current at the battery terminal is less than about 300mA and the battery voltage is close to the constant voltage, stop charging. After the charging is completed, if the battery voltage is lower than 4.1V, restart the battery charging. IP5328P adopts switching charging technology with a switching frequency of 500kHz. When charging with normal 5V input, the maximum input power is 10W; when charging with fast charging input, the maximum input power is 18W. The maximum charging current at the battery terminal can reach 5.0A, and the charging efficiency is as high as 94, which can shorten the charging time by 3/4. IP5328P will automatically adjust the charging current to adapt to adapters with different load capacities. IP5328P does not support simultaneous charging and discharging, and the output discharge port will be closed in the charging state.

1.material:metal 2.color:As the pictures shown 3.size:as the picture shows

Package include:1pc

Note: Please allow minor error due to manual measurement. The colors may be a little difference for the different monitor display. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.